Arduino 線上燒錄韌體測試
直接從網頁將編譯的十六進位檔案上傳到您的開發板。（僅限 Chrome）目前支援一些 Arduino 的開發板
- avr4809
- lgt8f328p
- uno (atmega328p)
- nano
- nano with old bootloader (非原廠相容板)
- pro mini
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 | /* Blink Turns an LED on for one second, then off for one second, repeatedly. Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to the correct LED pin independent of which board is used. If you want to know what pin the on-board LED is connected to on your Arduino model, check the Technical Specs of your board at: https://www.arduino.cc/en/Main/Products modified 8 May 2014 by Scott Fitzgerald modified 2 Sep 2016 by Arturo Guadalupi modified 8 Sep 2016 by Colby Newman This example code is in the public domain. https://www.arduino.cc/en/Tutorial/BuiltInExamples/Blink */ // the setup function runs once when you press reset or power the board void setup() { // initialize digital pin LED_BUILTIN as an output. pinMode(LED_BUILTIN, OUTPUT); } // the loop function runs over and over again forever void loop() { digitalWrite(LED_BUILTIN, HIGH); // turn the LED on (HIGH is the voltage level) delay(1000); // wait for a second digitalWrite(LED_BUILTIN, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second } |
ESP 系列: LED 閃爍範例
版本: / 硬體支援: ESP32, ESP32-S2韌體燒錄注意事項!!
- 本服務僅支援 Google Chrome 瀏覽器。
- 請務必確認您的開發板的類型，並確認已經正確安裝完驅動程式。
- Arduino NANO 開發版有分新版 BootLoader 與舊板，原廠正版的應該都是選擇新版 BootLoader，副廠與一般市面上 ch340 驅動的必須選擇舊版 BootLoader 版本的韌體進行燒錄。
發佈留言